Manufacturer: Rockler
Rating: 
(1 reviews)
| List Price: Offer Price: $49.99 |
|
Features:
- Measures 6-1/4” x 6-1/4” x 1”. Seal channels have 1-7/8” spacing.
- Vacuum generated at 800kpa, 115psi – -88kpa, -12.5psi, 26” Hg.
- Max holding force per face – 150kg (330lbs).
- Air Consumption at 80psi – 55 litres/min, 2cfm.
- Max supply pressure – 800kPa, 115psi.
Product Description
Clamp parts from the bottom side so you can rout, sand, saw or carve with no obstructions on the face of your workpiece. These little industrial-strength workhorses use a tiny amount of compressed air to generate a huge amount of clamping force, up to 330 pounds. Works great vertically for edge work, or horizontally for surface work. There are no moving parts, meaning they’ll provide years of trouble-free service. Made from lightweight, durable injection-moulded nylon. Has vacuum on both faces, allowing you to move the clamp around on the bench and resecure as needed. Each clamp includes a 40″ length of transparent air supply line, two 22″ rubber seals, and two Quick-Fit connectors.
Accessories also available:
* Use the Tee Connector (Rockler #30002) to string several clamps together for large pieces.
* Tall Seal (Rockler #31802) is slightly taller and softer for use with rough lumber and gently curving surfaces.
* On/Off Valve (Rockler #38740) allows you to turn the vacuum on and off, and provides the perfect conversion to a standard air line. 6-1/4″ square.
* Replacement Standard Seal also available (Rockler #35604)
One Comment
n
I found the V-Clamp to work as advertised and provided tremendous clamping power. It is perfect for holding items for routing and eliminates the need for conventional clamps that get in the way while such operations. The quick release feature via, the valve makes for quick material changes.n
n
The clamp does require a little practice to route the seal to hold smaller items, but I used it to hold a section of 2″ x 4″ to rout a rabbet.n
n
I recommend you view their website for clamping ideas. The clamps can be used in many configurations IE: tandem (Requires T connector) to clamp large items or vertical to hold an item for assembly. They do not recommend it for hold MDF, but I got good results on my masonite bench top. The clamp does require a continuous supply of air, but I had no problems with a medium size compressor that ran only occasionally. It is available in single sided (bolt on version) and a double sided vacuum self attaching version.
n