Manufacturer: Makita
Model: BTP140
Rating: 
(7 reviews)
| List Price: Offer Price: $397.84 |
|
Features:
- Hybrid 4-function tool with impact, hammer, driver, and drill modes; drills and drives into wood, metal, concrete, and more
- LXT Lithium-Ion batteries provide longer run time; 4-pole maximum torque motor delivers 1,240 in./lbs. of torque
- Ergonomic shape fits like a glove with even pressure and easy control
- 18-volt Lithium-Ion batteries (2); charger
- 5-3/4 to 7-3/8 inches long, depending on mode; 3.5 pounds; 3-year warranty on tool, 1-year warranty on battery
Product Description
FEATURES AND BENEFITS LXT Lithium-Ion battery optimum charging system produces 430% total lifetime work with 2.5x more cyclesCompact right angle impact wrench for fastening and loosening in tight spacesMakita built motor and impact mechanism produces 530 in. lbs. of maximum torque and 0-3,000 IPMVariable speed (0-2,000 RPM) for a range of applications from auto repair to product assemblyLarge conveniently located paddle switch for comfortable operationOver one foot of tool extension for extra reach into tight spacesL.E.D. light illuminates the work areaSoft grip handle provides increased comfort on the jobImpact housing can be rotated into one of 8 radial positions for difficult hand/angle positionsConvenient belt clip mounts on either side of the toolPhosphorescent bumper ring for locating tool in dark work areasLXT Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)30-Minute Rapid Optimum Charger communicates with the batterys built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature3-year warranty on tool and 1-year warranty on battery & charger INCLUDES 2 ea. 18V LXT Lithium-Ion 3.0Ah battery (BL1830)30-Minute Rapid Optimum Charger (DC18RA)Tool belt clip and screw (324705-1 and 251314-2)Contractor Bag (821007-X)Plastic battery cover (450128-8)ALSO AVAILABLE: BTL063Z(tool only) SPECIFICATIONS Square Drive 3/8″ No Load RPM 0 – 2,000 Impacts/Min.(IPM) 0 – 3,000 Torque (in.-lbs.) 530 Watt Hours 54 Battery (Ah) 3.0 Length 15-1/4″ Net Weight (lbs. w/battery) 3.7
Amazon.com Review
The best of both cordless worlds. Need the power of an impact driver, but also a hammer drill? Look no further than the Makita BTP140. Now you can drill a hole in masonry materials, and then drive a screw with the same tool by simply adding an anchor. This all-in-one drill has great ergonomics with comfortable rubber grips and is at least one pound lighter than most standard hammer drills.
The hybrid has the highly efficient Makita-built 4-pole motor with dual steel ball bearings. It has 1,240 in./lbs. of torque in impact mode and 2,300 to 27,600 blows per minute in hammer mode. This hybrid drill also has the best belt clip on the market today. The clip doesn’t rotate like it does on other brands, making it hard to remove. The drill stays in place in pants pockets, belts and tool belts with this heavy-duty steel belt clip. It can easily be relocated to the opposite side of the drill for lefties.
Located just above the trigger are two “headlights.” Headlights refer to small LED lights that provide light where you need it most. I was skeptical about this feature, thinking it was just another gimmick, but after using it for some time, I’ve come to depend on it. From lighting my way to the house in the dark, when bringing the batteries/tools on cold nights to providing light in a dark cabinet, closet, or under a desk; this a must-have feature. There’s also a glow-in-the-dark ring around the nose piece that makes the drill easier to locate in darkened spaces.
Another great feature on this tool is the all-metal, quick-change, hex, Insty bit chuck. The chuck only accepts drill bits and driver bits that have a hex shank at the opposite end of, for example, a #2 Phillips driver bit. This really speeds up bit changes. Hex Insty bits have really become the standard and are offered in every drill bit kit available. There is an accessory Makita chuck that converts the quick change, hex bit chuck into the older style 3-jaw chuck which will accept round shank drill bits, so you can use your existing bits.
Rubber grips adorn the exterior of this tool and protect it during impact if it falls. This kit comes with 2 batteries, charger and a cool case with convenient bit, screw and oddity storage on top.
The Benefits of Lithium-Ion
Lithium-Ion tools have more power with less weight. They have more power than a regular 18-volt tool because each battery cell within the battery pack has more juice than a standard battery and can deliver more power to the tool. These tools are also as light as a 12-volt tool because lithium is lighter than the nickel and cadmium in standard battery packs. 18-volt lithium-ion tools have the best power-to-weight ratio of any cordless tool. These tools come with the slide-in battery system and have more contact area than other tools. This means that more battery power will be transferred at a faster rate. I’ve seen other cordless tools with 2 small contacts and even worse, with loose connections. A tool with loose connections will not perform as advertised and may even cause premature death of the battery.
Battery Charging System
This Makita tool also has the most advanced charging system available. Generically, it’s called a “smart charging system.” A computer chip inside the battery lets the charger know exactly how to optimally charge the battery, to completely charge each cell within the battery and for maximum battery life. Each battery is made up of smaller 1.2-volt cells. Often a battery will drain unevenly during normal use, at different rates within these internal cells. A normal charger will stop charging the battery when one cell reaches maximum capacity, not all of them. Once this happens once, it will continue to do so as long as you use the battery. What this means is your 18-volt battery is now a 16- or 17-volt battery and it can drop even lower. A “smart charger” will charge every cell independently until each cell is fully charged, so your 18 volt battery will remain 18 volts for its entire life. This charger has a fan in it and blows air through the battery to cool it down before charging so the battery can be charged right away, unlike other brands, where the charger waits until the battery cools, or even worse attempts to charge a hot battery pack and damages it or decreases the life of the battery. These Makita lithium-ion batteries will last 280 percent longer than standard batteries and can be charged over 1400 times, as opposed to the standard of 600 to 800 times, which alone can justify the higher price tag. These slide-in batteries are 3.0 amp-hr batteries; they will provide power to the tool longer than standard 2.0 Amp-hour batteries. The higher the amp-hr rating, the longer the battery will last before it needs to be recharged. For light-duty applications, these batteries will last all day or even several days before recharging. I leave my charger at home when doing small jobs, because I know I don’t need it. The charge stays in the battery without dissipating during non-use and there is so much power in these batteries, I know I’ll have enough juice to complete a job. For heavy-duty applications, bring the charger with you just in case. –Gabriel Shantara Ford
Similar Products:
- Makita 192077-2 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills
- Makita 763198-1 Keyless Chuck 1/4″ Hex
- Bare-Tool Makita BSS610Z 18-Volt LXT 6-1/2-inch Lithium-Ion Circular Saw (Tool Only, No Battery)
- Makita BTD140 LXT 18 Volt Lithium-Ion Impact Driver Kit
- DEWALT DW0521 Quick Connect Impact Driver Conversion Chuck
5 Comments
n
I bought this when it came out, love it!n
When I had difficulty driving screws it was because I had it in hammer drill mode, NOT impact drive mode.n
It will drive deck screws below the surface.n
Fasteners with washers or a head can rotate brackets, you just have to learn the feel of it.n
Any driver can snap off a head, thats a weak fastener.n
If your fastener stops proud of the surface you probably found a steel plate.n
Four out of five stars for slight difficulty in sliding mode selector from day one, even so, its still the driver I use everyday for my living.
n
n
Very happy with this expensive drill. Use it for work installing drape rods, window blinds etc… so the usage isn’t that heavy. Have used it drilling into cement and tile a few times with the hammer drill and works well. The drill light is a big benefit since the lighting situations indoors, can be dim. On the driver setting, I would like to see the torque settings changed so that the highest setting would result in more torque. Without this I have to use it on the drill setting to get screws tight sometimes and this can cause a snapped hex heads from the unadjustable high torque.
n
n
I build custom furniture therefore, I use a screw gun every working day. I need a screw gun that can use every concieveable drill bit plus all the screw bits. Buying as an asserory a ball-dent chuck to increase the versitility of a tool that cost twice as much as a drill that has a keyless chuck as a standard is like an insult to someone who uses tools profestionally. I think Makita is looking for the rich hobbyest who will buy any gadget. Also, the bag is really cheep.n
n
Ed Handn
A Creation By Hand, Inc.
n
n
This is it. The perfect tool. Four tools in one. Light weight.Has hook to hang from your belt or high up on ladder. I retired all my other drills, hammerdrills, screwdrivers, impact drivers. Super.
n
n
Best Makita tool I have ever purchased. I don’t have to change to a drill or any function, this tool have everything, I use it almost every day. It paid for it’s self already even my wife says so. Purchasing another tool will not be necessary.
n