List Price: $299.00 Offer Price: $204.00

Features:

• 2- to 3-1/2-inch clipped head stick framing nailer
• Driving power: 1050 in./lbs.; pushbutton depth of drive
• Magnesium housing for durability; weighs 7.6 pounds
• Sets up as sequential- or bump-fire trigger
• Length: 20 inches; 7-year manufacturer warranty

Amazon.com Review
Framing, siding, decking, attaching wood to masonry, you name it, this versatile and lightweight framing nailer from Bostitch does it all. This clipped-head nail gun is equipped with a patented pushbutton adjustable depth guide that sets the nail to desired depths quickly and conveniently. A depth-of-drive control of course means there’s no adjusting compressor pressure, but also that you don’t have to fumble for tools when you’re standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.

Weighing just 7.6 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is a big plus when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production. The trigger works as either a sequential or bump fire trigger. A notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, a lightweight magnesium housing means easy handling and unsurpassed durability.

The unit drives 2- to 3-1/2-inch wire-collated framing nails. One of the most powerful framers on the market, this nailer features 1,050 inch-pounds of driving power for tackling even toughest engineered lumber applications. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for durability and years of use. –Brian D. Olson
Similar Products:

• Bostitch S10D Clipped Head 3-Inch by .120-Inch by 28 Degree Wire Collated Framing Nail (2,000 per Box)
• Bostitch S16D131 Clipped Head 3-1/2-Inch by .131-Inch by 28 Degree Wire Collated Framing Nail (2,000 per Box)
• Bostitch N62FNK-2 15 Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer
• Bostitch S8D Clipped Head 2-3/8-Inch by .113-Inch by 28 Degree Wire Collated Framing Nail (2,000 per Box)
• Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit

List Price: $29.99 Offer Price: $21.99

Features:

• Attaches to nose of RN46-1
• For use in installing vinyl siding
• Includes instructions for easy assembly

Product Description
Converts RN46 roofing nailer into a vinyl siding nailer.
Similar Products:

• Factory-Reconditioned Bostitch U/RN46-1 3/4-inch to 1-3/4-inch Coil Roofing Nailer
• Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer
• Grip-Rite GRCR5DGAL 1-3/4-Inch by .120 by 15 Degree Galvanized Coil Roofing Nail (7,200 per Box)
• Bostitch SB-CAPS 1,000 Caps
• Bostitch N66C-1 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer with Magnesium Housing

List Price: $99.99 Offer Price: $34.99

Features:

• Drives 5/8- to 2-1/2-Inch 18-Gauge brad nails
• tool free adjustable depth control
• Lightweight magnesium housing
• Oil-free operation
• 2.5 pounds; 1-year warranty

Product Description
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. The Bostitch BT200K-2 is a Factory Reconditioned 18 Gauge 5/8 to 2 Oil-Free Brad Nailer Kit. This lightweight tool has magnesium housing for jobsite durability. The oil-free operation prevents stains on work piece. It has ultra-quiet rear exhaust and open nose design for easy jam clearing. Includes: Brad nailer and carrying case
Amazon.com
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes.

This is brad nailer for the new millennium: a powerful driver in a feather-light body. The magnesium housing is a fantastic development from the Bostitch folks, who’ve known all along how to make a heck of a nailer. This one weighs in at a mere 2.1 pounds, letting you hoist and fire for hours without the strain and fatigue of the heavier models. The motor is whisper-quiet and oil-free, eliminating worries about oil-stained work pieces. Bostitch thought of everything with this one, even creating a magnetic magazine that hangs onto your fasteners for breezy loading. The adjustable depth control is quick and easy to use, without any fumbling. You can countersink in a flash, too. Don’t let the weight of this tool fool you, it packs serious power. It also comes with a thousand brads and a sturdy case. — Kris Jensen-Van Heste
Similar Products:

• Factory-Reconditioned Bostitch U/SX150K-1 1/2-inch to 1-1/2-inch 18 Gauge Narrow Crown Stapler with Magnesium Housing
• Factory-Reconditioned Bostitch U/N62FNK-2 1- to 2-1/2-inch 15 Gauge Angled Finish Nailer
• Factory-Reconditioned Bostitch U/F21PL Round Head 1-1/2-inch to 2-1/2-inch Framing Nailer includes Postiive Placement Tip
• DEWALT DW7450 Table Saw Stand for DW745 10-Inch Compact Job Site Table Saw
• Bostitch N62FNK-2 15 Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer

List Price: $289.99 Offer Price: $129.95

Features:

• High efficiency 1.6 to 2HP induction motor for long life
• High output, no-maintenance oil-free pump delivers 3.4CFM @40psi and 2.7cfm @ 90psi; large 6-gallon Tank reduces run time
• Lightweight compact pancake design for easy portability
• Includes quick coupler
• 52 pounds; 1-year warranty

Amazon.com Product Description
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new conditions. Some tools may contain cosmetic blemishes.

Power up pneumatic nailers, impact wrenches, ratchets and more with this beefy air compressor from Bostitch. Light enough for easy transport to any spot on the jobsite, this 6-gallon pancake compressor features oil-free operation for next to nil maintenance. A high-flow regulator lets this compressor power either three finish nailers at the same time, or a single roofing or framing nailer for smooth nailing performance. The compressor also powers single sealant dispensers, blow guns, paint sprayers, sandblasters, air brushes, and grease guns. The unit delivers 3.4 cfm at 40 psi and 2.7 cfm at 90 psi. A powerful efficient induction motor features manual-reset overload protection and draws only 10 amps for positive start-ups and long life. The purchase includes a coupler for quick and easy hose hookups. A rugged roll cage ensures jobsite protection. And, a compact design lets you store this compressor just about anywhere. — Brian D. Olson

What’s in the Box
Pancake compressor, quick coupler

Features

• Powerful efficient induction motor draws only 10 amps for easy start-up and long life
• High-performance oil-free pump for reduced maintenance and high air delivery
• Rugged roll cage protection for extreme job site durability

Specifications

• Horsepower: 2.0 Peak
• Motor Type: Induction
• Tank Capacity: 6 Gallons
• PumpType: Oil Free
• Weight: 51 lbs
• Air Delivery: @ 40 PSI 3.4 CFM @90 psi 2.7 CFM
• Operating Pressure: 0 – 125 PSI
  Product Description
  Includes 2 HP (Peak) Oil-Free Contractor Compressor – U/CAP2060P.
  Similar Products:
  • GoodYear 045 3/8-Inch x 50 Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends
  • Campbell Hausfeld MP5200 25-Piece Accessory Kit with Case
  • Factory-Reconditioned DEWALT D51844R Round Head 2-inch to 3-1/2-inch Framing Nailer
  • Porter-Cable 42234 Corner Chisel
  ]]> http://toolscity.com/air-tools/factory-reconditioned-bostitch-ucap2060p-105-amp-2-horsepower-6-gallon-oil-free-pancake-compressor/feed/ 3 http://toolscity.com/air-tools/bostitch-sb-2in1-2-in-1-narrow-crown-stapler18-gauge-brad-nailer/ http://toolscity.com/air-tools/bostitch-sb-2in1-2-in-1-narrow-crown-stapler18-gauge-brad-nailer/#comments Fri, 10 Oct 2008 08:33:32 +0000 saurabh http://www.toolscity.com/air-tools/bostitch-sb-2in1-2-in-1-narrow-crown-stapler18-gauge-brad-nailer/ Manufacturer: Bostitch
  Model: SB-2IN1
  Rating: (18 reviews)

  List Price: $209.90 Offer Price: $69.00

  Features:

  • 5/8- to 1-5/8 18-gauge brad nailer and ½- to 1-1/2-inch 18 crown staple combo tool
  • Adjustable depth dial; tool-free directional exhaust; 135 in./lbs. driving power
  • Nail lock-out feature eliminates dry firing; magazine holds 100 nails
  • Includes ¼-inch air fitting, 1,000 1 5/8″ nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil
  • Measures 9-1/4 inches (length); weighs just 2.6 pounds; 7-year warranty

  Amazon.com Review
  No need to buy a brad nailer and a crown stapler separately, this super-versatile nailer/stapler tool packs two tools into one handy unit. Perfect for crafts, paneling, nailing finish and trim, cabinetry and more, this tool let’s you swap nails for staplers rather than disconnecting and connecting a new tool to the compressor. In nailer mode, the unit drives brads up to a 1-5/8 inches in length for anything from stair construction to cabinet work. The stapler mode fires 18-gauge, 1-1/2-inch finish staples for easy furniture upholstering and craftwork. An adjustable depth guide sets staples and brads to desired depths quickly and conveniently. And, tool-free adjustable exhaust easily directs exhaust away from the user. –Brian D. Olson

  What’s in the Box
  ¼-inch air fitting, 1,000 2-inch brad nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil.
  Similar Products:

  • Bostitch HP118K 23 Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer
  ]]> http://toolscity.com/air-tools/bostitch-sb-2in1-2-in-1-narrow-crown-stapler18-gauge-brad-nailer/feed/ 5 http://toolscity.com/air-tools/bostitch-sb150slbc-1-34-inch-to-1-12-inch-cap-stapler-kit/ http://toolscity.com/air-tools/bostitch-sb150slbc-1-34-inch-to-1-12-inch-cap-stapler-kit/#comments Wed, 03 Sep 2008 10:30:11 +0000 saurabh http://www.toolscity.com/air-tools/bostitch-sb150slbc-1-34-inch-to-1-12-inch-cap-stapler-kit/ Manufacturer: Bostitch
  Model: SB150SLBC-1
  Rating: (7 reviews)

  List Price: $289.99 Offer Price: $209.95

  Features:

  • Stapler drives 3/4- to 1-1/2-inch staples with caps; applications include installing Tyvek, tar paper, and foam-board insulation
  • Adjustable depth guide
  • Lightweight, dureable aluminum housing weighs only 4.7 lbs
  • Includes oil, hex wrench, 1000 caps, 1000 staples, carrying case
  • 7-year warranty

  Amazon.com
  A strong blast of wind can set you back to square one if you’ve just spent the past few hours wrapping new construction or a house about to be sided. You know that the holding area of a staple isn’t great, but a 1-inch-diameter plastic cap on the staple gives it superior holding power. Bostitch’s cap stapler fires 18-gauge cap staples into tar paper, felt paper and foam insulation sheets like nobody’s business, keeping the wrap right where you put it. Depth of drive adjustments are tool-free, a nice feature when you’re 30 feet above the ground. It’s surprisingly light, it loads like a dream and lacks nothing in the power department. This is one of those tools that only does one thing, but boy, does it do it well.–Kris Jensen-Van Heste
  Product Description
  CAP STAPLER Use to install felt-Tyvek-Typar-foam board Uses plastic caps and SL style staples Uses SL style 5/16″ crown staples 300 in. lbs. of power to securely fasten caps Tool free adjustable depth of drive Easy loading-holds 100 caps and 160 staples Lightweight-durable aluminum housing Includes tool-case-oil-wrench & 1000 caps SB150SLBC1 BUTTON CAP STAPLER
  Similar Products:

  • Bostitch SB-CAPS 1,000 Caps
  • Bostitch SL50351G 1-Inch by 18 Gauge 5/16-Inch Crown Staple (5,000 per Box)
  • Bostitch SL50351-1/2G 1-1/2-Inch by 18 Gauge 5/16-Inch Crown Staple (3,000 per Box)
  • Stanley Bostitch #CAPPAK-5M Cap/Staple Pack
  • Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer
  ]]> http://toolscity.com/air-tools/bostitch-sb150slbc-1-34-inch-to-1-12-inch-cap-stapler-kit/feed/ 5