List Price: $11.99 Offer Price: $3.79

Features:

• Get more out of your knife and tool investment by maintaining new-from-factory edge
• High-grade aluminum oxide – favored by professionals for reliable, efficient honing characteristics
• Dual-grit stone produces correct blade refining technique; coarse for shaping edge, fine for finishi
• Standard, easy-to-handle 8″L x 2″W size can be hand-held or placed on bench; use wet or dry
• Brings back like-new sharpness to kitchen – sport knives, scissors & shears, wood & gardening tools

Product Description
The centuries-old classic sharpening and honing tool – so effective its never been replaced; lasts for decades. Essential accessory for anyone with an investment in quality cutting tools. For faster and easier sharpening, use ‘wet’ with water, mineral oil or other lubricant.
Similar Products:

• HDC 6″ Combination Sharpening Stone
• DIAMOND SHARPENING STONE – hone block – 2″ x 6″ double sided FINE + MEDIUM
• Scalpmaster Barber Strop
• J.A. Henckels 9-Inch Poly Sharpening Steel
• Ginsu International Traditions 14-Piece Stainless-Steel Knife Block Set

List Price: $11.00 Offer Price: $7.74

Features:

• For use with your shop dust collection system
• Maximizes system efficiency
• Cast-aluminum body with a steel gate
• Locking knob
• 4-inch OD

Similar Products:

• Jet JW1015 4-Inch Y-Fitting Dust Hose Connector
• Jet JW1044 4-Inch to 2-1/2-Inch Reducer
• JET JW1317 4″ Wire Hose Clamp – Each
• Jet JW1047 4-Inch Quick Disconnect
• Jet JW1003 4″ x 21″ Dust Collection Floor Sweep

List Price: $34.99 Offer Price: $34.99

Features:

• 2500 lb load capacity
• Easy to use adjustment mechanism
• Built-in v-grooves for work with pipes and lumber
• Rubber feet prevent sliding

Similar Products:

• Swanson Framing Wizard (5 layout tools In-One)
• Johnson 2300 4-Inch Trim Gauge
• Irwin 3041006 Speedbor Max 6 Piece 1/2-Inch to 1-1/4-Inch Self Feeding Spade Bit Assortment
• Stanley 94-553 25-Foot FatMax Xtreme Tape Rule with Free Skelaton Knife
• Milwaukee 48-08-0405 11-Piece Utility Kit

List Price: $29.99 Offer Price: $9.33

Features:

• 48-inch carpentry and construction aluminum level similar to magnetic level without magnetic edge
• End caps help protect against drops and shocks; fixed vials hand set to working edge for high accuracy
• Made of heaviest gauge I-beam with impact resistant vials and vial covers
• Combines with Macklanburg-Duncan Smart Module to create 48-inch digital level
• Lifetime warranty; measures 48 inches

Product Description
Heaviest gauge with impact resistant vials and vial covers. Vials handset to each working edge. Endcaps protect tool against drops and shocks.
Amazon.com Product Description
Ideal for carpenters and contractors who want affordable quality, the M-D Building Products 48-Inch Carpentry and Construction Aluminum Level is similar to a magnetic level but without the magnetic edge. Made of the heaviest gauge I-beam with impact resistant vials and vial covers, it provides durability and long life. The end caps help protect the tool against drops and shocks. The fixed vials are hand set to the working edge for high accuracy. This level can be combined with the Macklanburg-Duncan Smart Module to create a 48-inch digital level. It comes with a lifetime warranty.
Similar Products:

• M-D Building Products 92346 SmartTool Module Only
• Denali 18-Inch Bolt Cutter with Aluminum Handles
• Redback Tools Maxistrike JT-004 24-Ounce Mill Face Rip/Claw Hammer
• Denali 13-Piece Wood Boring Spade Bit Set
• Stanley 51-944 20-Ounce AntiVibe Rip Claw Hammer

List Price: $11.54 Offer Price: $8.07

Features:

• Aluminum carpenter’s square offers wide range of easy-to-read measurements, tables, and conversions
• Helpful reference conversion including new lumber, decimal equivalent, and metric conversion tables; 45-, 60- and 30-degree angle markings
• High tempered aluminum for maximum durability; protective lacquered coating; buffed finish
• Deep, embossed, 1/8-inch graduations for long-term visibility
• Body: 24- by 2-inches; tongue: 16- by 1-1/2-inches; backed by lifetime limited warranty

Amazon.com Product Description
This Aluminum Carpenter’s Square is a versatile tool providing a wide range of easy-to-read English measurement scales, tables, and conversions, including the new lumber scale, decimal equivalent table, and metric conversion table; formula for squaring a foundation; 45-degree, 60-degree, and 30-degree angle markings; volume and area formulas; wood screw gauge table; drill and nail sizes (common and finish); quantity per pound; and depth scale. This square is built with high tempered aluminum for maximum durability and comes with a buffed finish and protective lacquered coating to resist corrosion. The design features deep, embossed, long-wearing 1/8-inch graduations for long-term visibility; graduations and table information are on both sides of the square for added convenience. This carpenter’s square has a body length of 24- by 2-inches and a tongue length of 16- by 1-1/2-inch and is backed by a lifetime limited warranty.
Product Description
Non-corrosive aluminum construction with polished finish. Deep 1/8″ graduations on face and back assure long term visibility. Body 24″x2″, tongue 16″x1-1/2″. Valuable tables and information imprinted on both sides.
Similar Products:

• Stanley 46-123 12-Inch Contractor Grade Combination Square
• Stanley 28-540 1-1/4-Inch Wood Handle Putty Knife
• Empire 3990 12-Inch Heavy-Duty Magnum Rafter Square
• Swanson Tool SO101 7-inch Speed Square
• Stanley 58-930 Cushion Grip Nail Set, 3-Piece

List Price: $79.99 Offer Price: $54.99

Features:

• 30 Amp aluminum power inlet box for generators up to 7,500 watts
• Avoid running generator cord through a door or window
• Aluminum construction won’t rust
• Rain-tight even when cord is connected
• 2-year limited warranty

Amazon.com Product Description
You can avoid running generator cords through a door or window with the GenTran 30 Amp aluminum power inlet box. If your electrical panel is in the basement or an interior room, you’ll need to mount this power inlet box on the exterior of your house or building and hardwire to transfer switch. You can connect generators up to 7,500 watts to this power inlet box during an outage. Constructed of rust-free aluminum, this box is rain-tight even when the cord is connected. The NEMA 3R-rated aluminum enclosure won’t rust and it includes a NEMA L14-30 male inlet. It comes with a 2-year limited warranty.
Similar Products:

• GenTran PowerStay 30 Amp Manual Transfer Switch #301060
• GenTran 10-Foot 30 Amp Generator Cord for up to 7,500-Watt Generator #RJB10410
• GenTran 25-Foot 30 Amp Generator Cord for up to 7,500-Watt Generator #RJB10425
• GenTran 30 Amp 8-Circuit Transfer Switch for up to 7,500-Watt Generators #3028
• Classic Accessories Generator Cover, Large, Black #79537