List Price: $249.66 Offer Price: $249.66

Features:

• Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing
• Contact-trip trigger; large-capacity magazine
• Aluminum housing
• Accomodates nails from 1-1/2 to 3-1/4 inches
• Weighs just 8 pounds; 7-year warranty; made in the USA

Amazon.com Review
A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch’s utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn’t the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls–the inevitable beating nailers take on a job site. The nailer’s aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels–it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not have adjustable drive depth. –Jonathon Tudor
Similar Products:

• B & C Eagle 2X099HDRC Round Head 2-Inch by .099 by 15 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Mini Coil Nail (3,000 per Box)
• Bostitch N89C-1 Coil Framing Nailer
• B & C Eagle 238X099RC 2-3/8-Inch by .099-Inch by 15 Degree Ring Shank Wire Collated Coil Framing Nail (3,000 per Box)
• B & C Eagle 314X120C 3-1/4-Inch by .120-Inch by 15 Degree Wire Collated Coil Framing Nail (2,500 per Box)
• B & C Eagle 314X120HDRC Round Head 3-1/4-Inch by .120-Inch by 15 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Mini Coil Nail (2,500 per Box)

List Price: $300.00 Offer Price: $139.95

Features:

• Tool converts to metal connector nailer in seconds with included tip
• Lightweight Magnesium housing weighs just 8.1 lbs
• More power: 1050 inch lbs for engineered lumber
• Tool free adjustable exhaust
• Patented push-button depth of drive

Product Description
Includes Plastic Collated Framing / Metal Connector Nailer – U/F21PL.

List Price: $700.00 Offer Price: $199.99

Features:

• Tool works as fast as you do with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
• Headlights provide increased visibility in low-light conditions or confined areas without any light
• 6 position dial allows the user to move between applications without having to re-acquire exact depth setting
• Easy access to the nosepiece for the simple removal of a jammed fastener without the use of screwdrivers or tool wrenches

Product Description
12V To 14.4V, 16 Gauge Cordless Straight Finish Nailer Kit, 1-1/4″-2-1/2″3 2MM-65MM, With Tool Free Jam Clear, Selective Actuation Fire Mode, Dual Load Magazine & Metal Top Cap, & Runs On 12V To 14.4V XRP Battery Packs.
Amazon.com
No compressor. No hoses. No kidding. And no sacrifices in speed or power, either. There’s absolutely no comparison between this performer and the fuel-cell powered competition, which we thought was a great innovation. But there’s no costly fuel cell to replace on this tool—-just pop on a recharged XRP battery and get back on the job. The only difference you’ll feel between this and a traditional pneumatic is that you’re not tethered to an air hose. It’s just as fast and fires just as powerfully into both soft and hard joints. We love that you can choose bump or sequential mode for precision or speed, something most nailers don’t offer, and the integrated headlight is another impressive addition, really lighting up your workpiece even in the worst conditions. There’s a fantastic six-position numbered dial to reference your depths, so you can move easily between, for example, baseboard and crown molding without struggling to reset the depth. DeWalt’s covered what would have been our main safety concern: An air tool can’t fire without a hose, but what’s to keep this one from being accidentally fired? They’ve built in a contact trip lock-off. We were pleased with the troubleshooting process, too—the nosepiece is clear and very accessible, letting you clear a jammed fastener without screwdrivers or wrenches, though we couldn’t get it to jam for us. Rear loading is simple and fast, and it accepts most brands of 16-gauge nails. It’s built tough for the job site, but the home hobbyist would love this tool. Just hook it on your tool belt and go; it’s one of the coolest tools we’ve seen, and the kit has everything you need: a one-hour charger, two 14.4V XRP batteries, reversible belt hook, no-mar tip, safety glasses and the heavy-duty kit box.–Kris Jensen-Van Heste
Similar Products:

• DeWalt DCS16200 2-Inch by 16 Gauge Finish Nail (2,500 per Box)
• DeWalt DCS16150 1-1/2-Inch by 16 Gauge Finish Nail (2,500 per Box)
• DeWalt DCS16250 2-1/2-Inch by 16 Gauge Finish Nail (2,500 per Box)
• DeWalt DCS16125 1-1/4-Inch by 16 Gauge Finish Nail (2,500 per Box)

List Price: $490.00 Offer Price: $119.99

Features:

• 1-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
• Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
• Durable, lightweight magnesium housing
• Includes no-mar tip, 3 profile tips, 1,000 fasteners, durable plastic carrying case
• 11.63 by 3.13 inches; extremely light 3.8 pounds; 7-year limited warranty

Product Description
Includes 2-1/2″ 15-Gauge Oil-Free Angled Finish Nailer Kit – U/N62FN, Carrying Case.
Amazon.com Review
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes.

The first time you pick up the Bostitch N62FNK-2, you might wonder if such a lightweight finish nailer (it weighs just 3.8 pounds, the lightest in its class) can really get the job done. But once you pull the trigger and feel the 400 in./lbs. of driving power at your fingertips, those doubts will disappear and you’ll wonder how you ever did without it before. Rugged and sturdy enough for virtually any application, the N62FNK-2 delivers fast, clean, accurate results using finish nails from 1 to 2-1/2 inches in length. An oil-free engine means no unsightly stains on your work–a definite plus–and no need for messy lubrication, an even bigger positive. Tool-free maintenance and depth control only add to the allure. — Carl Thress

List Price: $199.00 Offer Price: $193.95

Features:

• 1st 16 Gauge Pheumatic in the Industry
• Real Load Magazine with Two-Step Follower
• Directional Exhaust Cap
• Soft Textured Grip
• Nail Lockout

Product Description
T250A-F16, 1-1/4″ To 2-1/2″, Pneumatic Angled Finish Gun Nailer, 16 Gauge, Angled Finish Nails, Comes With Rugged Plastic Carrying Case, Safety Glasses & Extra No-Mar Tip, This Paslode Finish Nailer Features A Tool Free Adjustable Depth Of Drive For Precise Control Of Nail Depth, No-Mar Tip To Protect Trim Surfaces & Finishes & New Compact Angled Magazine For Easier Access Into Hard To Reach Areas, Is Great For Door & Window Trim, Paneling, Baseboard, Casing, Crown Molding, Cabinetry & Door Jambs, Comes With Case, 1 Year Manufacturers Warranty.
Similar Products:

• Paslode 650047 2-Inch by 16 Gauge 20 Degree Angled Galvanized Finish Nail (2,000 per Box)
• Paslode 650046 1-3/4-Inch by 16 Gauge 20 Degree Angled Finish Nail (2,000 per Box)
• Paslode 650230 1-1/4-Inch by 16 Gauge 20 Degree Angled Galvanized Finish Nail (2,000 per Box)
• Paslode 650214 1-1/2-Inch by 18 Gauge Galvanized Brad Nail (2,000 per Box)
• Paslode T200 5/8 to 2-Inch 18-Gauge Brad Nailer #500959

List Price: $504.99 Offer Price: $299.00

Features:

• 1-1/4-inch to 2-1/2-inch cordless 16-gauge gas angled finish nailer with non-mar tip and sight lines
• Depth-of-drive wheel with probe position indicator; locks tool at 10 nails to prevent blank firing
• Comfortable “sure grip” and soft trigger
• Includes nailer, battery, 2-hour charger
• 11-1/2 by 10-3/4 by 3-1/4 inches; 4.9 pounds with battery; 5-year warranty

Product Description
Paslode IM250A, 2-1/2″, Angled, Cordless, Finish Nailer, Drives 1-1/4″ To 2-1/2″, 16 Gauge, No Hose Or Compressor Required, 1 Year Warranty.
Amazon.com Review
Perfect for finish and trim work that requires getting into small spaces, this Impulse finish nailer from Paslode lets you avoid the hassle of compressor hoses and compressor noise. The nailer’s small, lightweight body (just under 5 pounds) is easy to grip and, because you’re not hooked up to a hose, doesn’t cause as much arm fatigue as other nailers. It drives 1-1/4- to 2-1/2-inch nails and has easy-to-adjust drive depth, a probe position indicator, and an angled clip for improved maneuverability. This Paslode nailer uses a patented system that requires both a fuel cell and an included rechargeable battery. We were impressed with the gun’s performance–it’s consistent and provides plenty of power for most uses. This model will shoot up to 1,200 nails on a single fuel cell and up to 4,000 nails on a full battery charge. It has a convenient belt hanger, too, so you won’t have to lay it on the ground or on top of a ladder, and the high-visibility orange makes it difficult to overlook. The kit includes a plastic carrying case and a lightweight charger. Please note that the nailer does not come with the fuel cell included. –Jonathon Tudor
Similar Products:

• B & C Eagle AF16X2 2-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
• B & C Eagle AF16X212 2-1/2-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
• B & C Eagle AF16X114 1-1/4-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
• B & C Eagle AF16X112 1-1/2-Inch by 16 Gauge by 20 Degree Angled Finish Nail (2,000 per Box)
• Paslode Short Yellow Fuel Cell Pack #650039 for the Paslode Cordless Trim Nailers

List Price: $34.99 Offer Price: $32.99

Features:

• With adjustable depth control you are able to control the depth of drive in various types of wood.
• Easily change the direction of air exhaust away from the project with an adjustable exhaust.
• Quick clear nose allows you to quickly remove nail jams to reduce downtime.
• Non-marring tip will not dent the work surface.

Product Description
1-1/4″, 18 Gauge Brad Nailer, For Molding, Decorative Trim, Window Casings, Furniture Trim, Crafts & Picture Frame Assembly, Quick Cear Nose, Adjustable Exhaust, Non Marring Tip, Adjustable Depth Control Requires .8 CFM @ 90 PSI, Kit Includes: Nailer, Nails, 2 Allen Wrenches, Nailer Oil, Carry Case.

List Price: $131.25 Offer Price: $99.99

Features:

• Shoots 5/8″ to 1 1/4″ 18 Gauge Brads
• Comes with a 1/4″ Fitting
• Includes carrying case
• 360 degree directional exhaust
• Easy to use side load magazine

Product Description
Features tool-free depth of drive for accurate nail depth setting into woods of varying density, easy clear nose provides easy access to minimize disruption & 360 degree adjustable exhaust provides control of exhaust direction. Includes plastic case.
Similar Products:

• Omega Women’s Constellation Collection Diamond Steel Watch #1476.63
• Gordon Ramsay by Royal Doulton Stainless-Steel 8-Piece Cookware Set
• Corel Ulead VideoStudio 11.5 Plus [AMAZON.COM EXLCUSIVE]
• WMF Stepped Wok with Bonus Profilo Gadget Set
• Hunter Lighting Sperry 3-Lamp Multi-Pack

List Price: $169.99 Offer Price: $89.95

Features:

• Powerful but lightweight 18-gauge brad nailer
• Drives 5/8- to 2-inch brad nails with ease; adjustable depth of drive controls nail setting depth
• Directional exhaust keeps particles safely away from eyes
• Includes safety glasses, lube oil, Allen wrenches, manual, and case
• 9.8 inches long; weighs just 4.8 pounds

Product Description
T200-F18, 2″, Air Powered, 18 Gauge, Brad Nailer, Drives 18 Gauge Brad Nails From 5/8″ To 2″, Includes Case, This Brad Nailer Is Extremely Lightweight & Well Balanced Which Reduces Operator Fatigue, 1 Year Warranty.
Amazon.com Review
Most of us who use pneumatic nailers are partial to one brand or another, and if Paslode isn’t usually your choice, we think you owe it to yourself to have a look at this brad nailer.

We’ll get out of the way the only thing we don’t like: depth-of-drive isn’t tool-free. Aside from that relatively small thing, this is one fantastic nailer. It’s the lightest we’ve ever had in hand, and while that may not seem like such an important thing, it will be if you’re working overhead for extended periods.

Probably its most outstanding feature is an unusually streamlined nose architecture that fits neatly into spots the other brands can’t reach and guarantees your fastener drives exactly where you want it to.

Of course, this Paslode has all the things you expect from any nailer: a non-marring tip, directional exhaust to keep debris away from your face and a nice fastener length range, from 5/8 to 2-inch brads.

If you’ve already got a 16-gauge, you may not feel the need for the smaller gun, but we’ll just say that its delicate touch is all we’d want when working with cove, shoe, base and quarter-round moldings, stair spindles, outside crown corners, paneling, and any sort of decorative trim.–Kris Jensen-Van Heste

What’s in the Box
Nailer, safety glasses, lube oil, allen wrenches, manual, case
Similar Products:

• Paslode 650214 1-1/2-Inch by 18 Gauge Galvanized Brad Nail (2,000 per Box)
• Paslode 650212 1-Inch by 18 Gauge Galvanized Brad Nail (2,000 per Box)
• Paslode 650215 2-Inch by 18 Gauge Galvanized Brad Nail (2,000 per Box)
• Paslode T250S 16 Gauge Pneumatic Straight Finish Nailer
• B & C Eagle B18-2 2-Inch by 18 Gauge Galvanized Finish Brad Nail (5,000 per Box)

List Price: $622.00 Offer Price: $199.99

Features:

• Fires standard 2″ to 3-1/2″ plastic collated 22 degree round head stick nails
• Easy accessible nail depth adjustment to nine different depths
• Lightweight (8.4 lbs.) and perfectly balanced for easy operation
• Unique features include built-in air filter, ergonomic handle and easy load magazine
• “Dry-fire” prevention system and a rubber bumper prolongs life of tool

Product Description
Makitas AN922 pneumatic framing nailer is a lightweight (only 8.4 lbs.) yet sturdy framing nailer, firing 2in. to 3 1/2in., 22deg plastic or wire collated round- head nails. The easy-load, rugged aluminum magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air filter system prevents debris from entering the tool, extending tool life and reducing down time. The 9 quick-dial depth adjustment settings give you precise control of nail depth. Nose piece with sure-grip spikes prevents slipping. Operating PSI: 65 – 120, Fastners Used: Framing Nails, Fastner Sizes (in.): 2 – 3 1/2, Adjustable Depth Contol: Yes, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Length (in.): 8.4, Tool Weight (lbs.): 21 1/2
Similar Products:

• Woodline USA WL-2065 66-Piece 1/4-Inch Shank Master Set
• Makita AN942 Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
• Hitachi 19408 50-Foot 3/8-Inch Polyurethane Air Hose
• Milwaukee 7100-20 Round Head 2-Inch to 3-1/2-Inch Framing Nailer
• Woodline USA WL-2022 15-Piece 1/2-Inch Shank Intermediate Set