List Price: $38.10 Offer Price: Too low to display

Features:

• High strength rare earth magnet
• Fits into tool pouch holster
• Two crystal clear, non fogging, unbreakable, monoblock, acrylic vials
• Two flush mounted magnets for greater convenience

Product Description
10″, Type 81SM, Diecast Torpedo Level With High Strength Magnetics.
Amazon.com Product Description
The Stabila Rare Earth Magnetic Torpedo Level is built with a heavy-duty, 10-inch die-cast metal frame and two acrylic vials (one horizontal, one vertical) that are crystal-clear, non-fogging, unbreakable, and monoblock for durability and ease of use; the design features 2 high-strength, flush-mounted rare earth magnets which are 10 times as strong as standard magnets for greater convenience and reading accuracy. This torpedo level fits into a tool pouch holster for easy carrying. This product has certified level accuracy to .029 degrees (1/32-inch over 72-inch) in top read position and is backed by a lifetime limited warranty; the vials will never fog, leak, or require adjustment, ensuring reliable, life-long use.
Similar Products:

• Stabila 30001 Leather Holster for 25010 & 25100 Levels
• Stabila 11990 Pocket Level
• Tajima CR202B-P Chalk-Rite II Ultra-Thin Snap Line with Triple Speed Rewind and 1.4-ounce Bottle Blue Chalk-Rite Chalk
• Stabila 30025 Jamber Level Case
• Stabila 29816 General Purpose Combo Kit Includes 29048 – 48-ich Level and 29016 – 16-inch Level

List Price: $154.99 Offer Price: $129.99

Features:

• Angle accuracy to 1/10 of a degree
• Mode button lets you see angles in 3 ways – degrees, percent slope, or pitch
• Audible tone allows for hands-free operation
• Runs off of a standard 9-volt battery
• Automatic shut-off after 5 minutes

Amazon.com Product Description

Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines.  You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle.  So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy.  The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it’s not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can’t, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.

Many versatile options
If you can imagine times you’d like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D’s top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don’t.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings — in inches of rise per foot of run — right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can’t see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

Similar Products:

• M-D Building Products 92924 48-Inch Soft Carrying Case
• M-D Building Products 92379 24-Inch SmartTool with Module And Case
• M-D Building Products 92288 SmartTool 24-Inch Electronic Level with Module
• Bosch DWM40LK Miter Finder Digital Protractor/Angle Kit with Extension Leg and Case
• M-D Building Products 92346 SmartTool Module Only

List Price: $79.99 Offer Price: $30.67

Features:

• Easily transfers miter angles with no calculations necessary; computes angles accurately to +/- 1 degree
• Features horizontal and vertical vials; can be used as a spirit level
• High-quality anodized aluminum body
• Includes protractor and carrying case
• 18 inches in length; 1.4 pounds

Amazon.com Review
Take the guesswork out of measuring, marking and reading angles—no tricky geometry or complicated calculations required—with the Denali Digital Angle Protractor. Simply swing open the tool’s pivoting leg and immediately read the angle on the digital display window. The tool is accurate within 1 degree, and will read angles ranging from zero to 185 degrees. The anodized-aluminum protractor is also fitted with two bubble vials for use as a conventional level.

The Denali Digital Angle Protractor weighs just over a pound, and measures a slim 1 inch by 2 inches by 18 inches. It’s powered a single 9-volt battery (included) that typically lasts about 100 hours of normal use. The tool comes with a protective carrying case that’s equipped with a convenient steel belt clip.

The protractor provides a quick and precise way to read existing angles, such as roof slopes, wall corners, handrails, and mitered trim work. You can also use it to mark any desired angle up to 185 degrees. It’s an indispensable tool when installing crown molding; use it to determine the angle of outside corners, which are rarely 90 degrees. This versatile tool will also do many of the jobs typically reserved for a sliding T-bevel square. And if all that weren’t enough, the Denali Digital Angle Protractor costs about three times less than any comparable tool on the market. –Joseph Truini

What’s in the Box
Denali Digital Angle Protractor with battery, Soft-sided carrying case with belt clip, instruction manual

About Denali
Named after the tallest mountain range in North America, Denali tools stand above the rest in providing an exceptional blend of quality craftsmanship, professional-grade features, and customer value. All homeowners, hobbyists, do-it-yourselfers, and price-conscious contractors will appreciate Denali’s design and functionality. Denali products compliment one another and will be an indispensable and long-lasting addition to any home or workshop. Our products undergo rigorous third-party testing to ensure high performance standards. Denali tools are available exclusively on Amazon.com.
Similar Products:

• Denali 24-Inch Digital Box-Beam Level
• DEWALT Concealer Clear Anti-Fog Dual Mold Safety Goggle #DPG82-11C
• Denali 14-Inch Digital Protractor With Laser and Carrying Case
• Black & Decker BDSL10 36″ Gecko Grip Level with Accu Mark
• Columbian 27300 -15 piece Professional Clamp set

List Price: $99.90 Offer Price: $99.90

Features:

• Angle accuracy to 1/10 of a degree
• The mode button lets you see angles in 3 ways: degrees, % slope or pitch
• Audible tone allows for hands-free operation
• Runs off of a standard 9v battery
• Automatic shut-off after 5 minutes

Product Description
SmartTool Sensor Module digitally displays degrees, percent slope and pitch to 1/10″ accuracy. Features audio sound at level and plumb. Module can be used alone or with Carpentry & Construction Levels.
Amazon.com Product Description

Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines.  You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle.  So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy.  The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it’s not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can’t, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.

Many versatile options
If you can imagine times you’d like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D’s top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don’t.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings — in inches of rise per foot of run — right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can’t see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

Similar Products:

• M-D Building Products 92395 Magnetic Bracket for Smart Module
• M-D Building Products 63388 48-Inch Carpentry and Construction Aluminum Level
• M-D Building Products 92379 24-Inch SmartTool with Module And Case
• M-D Building Products 92288 SmartTool 24-Inch Electronic Level with Module
• M-D Building Products 92296 SmartTool 47-1/4-Inch Digital Electronic Level

List Price: $52.50 Offer Price: Too low to display

Features:

• Multi Pockets to hold additonal levels
• Durable exterior and soft padded interior
• Adjustable strap for easy transport
• Great for storage of levels
• Carrying case for jamber levels

Product Description
Strong Padded liner to protect level in transit. Tough high strength nylon outer shell. Heavy duty, large tooth zipper. Convenient shoulder strap for easy carrying. Convenient loop for hanging on pegs and hooks
Amazon.com Product Description
The Stabila Jamber Level Case makes transportation and storage of levels easy and is designed specifically to fit Stabila jamber level sets (any series). The case has a total of 6 pockets that can accommodate levels in a wide variety of sizes, including: 78-inch, 48-inch, 32-inch, 24-inch, 16-inch and torpedo. This level case features a durable exterior with the Stabila logo and a soft padded interior. This product comes with an adjustable strap to provide added comfort and convenience and is backed by 30-day limited warranty.
Similar Products:

• Stabila 37532 Jamber 78-Inch and 32-Inch Aluminum Box Beam Level Set
• Stabila 38532 Magnetic Jamber Set (38678 – 78-Inch & 38632 – 32-Inch), High Strength Frame, Accuracy Certified Professional Level
• Stabila 37816 48-Inch and 16-Inch Aluminum Box Beam Level Set
• Stabila 37424 – 24-Inch builders level, High Strength Frame, Accuracy Certified Professional Level
• Stabila 30059 59-Inch Padded Nylon Case

List Price: $29.99 Offer Price: $9.33

Features:

• 48-inch carpentry and construction aluminum level similar to magnetic level without magnetic edge
• End caps help protect against drops and shocks; fixed vials hand set to working edge for high accuracy
• Made of heaviest gauge I-beam with impact resistant vials and vial covers
• Combines with Macklanburg-Duncan Smart Module to create 48-inch digital level
• Lifetime warranty; measures 48 inches

Product Description
Heaviest gauge with impact resistant vials and vial covers. Vials handset to each working edge. Endcaps protect tool against drops and shocks.
Amazon.com Product Description
Ideal for carpenters and contractors who want affordable quality, the M-D Building Products 48-Inch Carpentry and Construction Aluminum Level is similar to a magnetic level but without the magnetic edge. Made of the heaviest gauge I-beam with impact resistant vials and vial covers, it provides durability and long life. The end caps help protect the tool against drops and shocks. The fixed vials are hand set to the working edge for high accuracy. This level can be combined with the Macklanburg-Duncan Smart Module to create a 48-inch digital level. It comes with a lifetime warranty.
Similar Products:

• M-D Building Products 92346 SmartTool Module Only
• Denali 18-Inch Bolt Cutter with Aluminum Handles
• Redback Tools Maxistrike JT-004 24-Ounce Mill Face Rip/Claw Hammer
• Denali 13-Piece Wood Boring Spade Bit Set
• Stanley 51-944 20-Ounce AntiVibe Rip Claw Hammer

List Price: $16.49 Offer Price: $11.25

Features:

• Rigid I-beam cross-section features low-profile, shock-absorbing end caps for durability
• 180-degree rotating view for a range of situations
• Measuring scale printed directly on the level eases layout work
• Powder-coated frame withstands nicks and offers a comfortable hold. Clear-acrylic vial covers for easy readability
• Limited Lifetime Warranty

Product Description
Rigid I-beam cross-section features low-profile, shock-absorbing end caps for durability. 180-degree rotating view for a range of situations. Measuring scale printed directly on the level eases layout work. Powder-coated frame withstands nicks and offers a comfortable hold. Clear-acrylic vial covers for easy readability.

List Price: $78.90 Offer Price: $59.45

Features:

• Accuracy certified, top and bottom readings
• Strong, wide frame design
• Removable rubber end caps for flush measuring
• Oversized rubber hand holds for comfort
• Accuracy guaranteed for life

Product Description
Crystal clear vials readable in any direction with no change in accuracy tolerance. Guaranteed for life. Spring steel hairline indicators in vials. Best frame strength-to-weight ratio. Removable endcaps for scribing in corners and for reading tight header and openings. Rubber endcaps grip walls and do not leave marks. Metal hang hole for storing level on site. Fast and accurate installations.
Amazon.com Product Description
The Stabila Non-Magnetic Builder’s Level is a professional-grade tool ideal for framing, trim carpentry, and tile applications. Designed with a wider profile for added strength in the box beam frame, this builder’s level also features oversized rubber hand holds for comfortable use and a metal hang hole for storing the level on site. The level includes rubber end-caps and anti-slip wall pads that grip the walls for added level stability; the end-caps can also be removed for flush measuring when scribing corners or reading tight header and sill openings. The 3 acrylic vials (1 horizontal and 2 vertical) are guaranteed to never break, leak, or fog; with a permanently calibrated, epoxy-locked, crystal-clear design and internal spring steel hairline indicators, these vials are readable in any direction and have a certified level accuracy of .029 degrees in both vial-up and vial-down readings. The yellow electrostatic epoxy coating provides high-visibility and resistance to mortar adherence and corrosion. This level measures 24 inches in length and is backed by a lifetime limited warranty.
Similar Products:

• Stabila 37448 – 48-Inch builders level, High Strength Frame, Accuracy Certified Professional Level
• Stabila 30015 5-pocket case fits 48-Inch,32-Inch,24-Inch,16-Inch,torpedo
• Stabila 37472 – 72-Inch builders level, High Strength Frame, Accuracy Certified Professional Level
• Stabila 37816 48-Inch and 16-Inch Aluminum Box Beam Level Set
• Stabila 37416 – 16-Inch builders level, High Strength Frame, Accuracy Certified Professional Level

List Price: $49.99 Offer Price: $39.99

Features:

• Digital laser protractor; includes horizontal and vertical bubble level for use as level
• Easily transfers miter angles with no calculations necessary; computes angles accurately to +/- 1 degree
• High-quality anodized aluminum body with a large easy to read LCD screen
• Laser is stored inside the level and is easily mounted when needed
• Includes protractor and carrying case

Amazon.com Product Description
Take the guesswork out of measuring, marking and reading angles—no tricky geometry or complicated calculations required—with the Denali 14-Inch Digital Angle Protractor. Simply swing open the tool’s pivoting leg and immediately read the angle on the digital display window. The tool is accurate within 1 degree, and will read angles ranging from zero to 185 degrees. The anodized-aluminum protractor is also fitted with two bubble vials for use as a conventional level. The Denali 14″ Digital Angle Protractor is equipped with a laser that is cleverly stored inside the protractor’s body. Laser is easily mounted to the swing arm via magnets when needed. It’s powered a single 9-volt battery (included) that typically lasts about 100 hours of normal use. The tool comes with a protective carrying and storage case.

The protractor provides a quick and precise way to read existing angles, such as roof slopes, wall corners, handrails, and mitered trim work. You can also use it to mark any desired angle up to 185 degrees. It’s an indispensable tool when installing crown molding; use it to determine the angle of outside corners, which are rarely 90 degrees. This versatile tool will also do many of the jobs typically reserved for a sliding T-bevel square. And if all that weren’t enough, the Denali Digital Angle Protractor costs about three times less than any comparable tool on the market. — Joseph Truini

The Denali Story
Named after the tallest mountain range in North America, Denali tools stand above the rest in providing an exceptional blend of quality craftsmanship, professional-grade features, and customer value. All homeowners, hobbyists, do-it-yourselfers, and price-conscious contractors will appreciate Denali’s design and functionality. Denali products compliment one another and will be an indispensable and long-lasting addition to any home or workshop. Our products undergo rigorous third-party testing to ensure high performance standards. Denali tools are available exclusively on Amazon.com.

List Price: $24.40 Offer Price: $20.41

Features:

• Water-resistant
• Extra reinforcement stitching
• Heavy-duty zipper
• Top loop for convenient hanging

Similar Products:

• Johnson Level LCS24 24-Inch Softside Level Case
• Johnson Level LCS48 48-Inch Softside Level Case
• Johnson Level 86721 72-Inch Aluminum Box Beam Level (BigX)
• Johnson Level 9872-HH 72-Inch Aluminum Box Beam Level
• FastCap Accuscribe Scribing Tool