List Price: $72.99 Offer Price: $30.79

Features:

• Set includes 5 shims for precision work
• Micrograin Carbide tipped blades for longevity and precision
• Cuts smooth dados (grooves) from 1/8-Inch to 13/16-Inch
• Beautiful wooden storage box protects your blades

Product Description
8″ dado blade has stacking blades with carbide tips. Cuts grooves 1 8″ to 13 16″. Contains 1 left outside edge circular blade, 1 right outside edge circular blade, 5 8″ arbor, (4) 1 8″ twin tooth choppers, (1) 1 16″ twin tooth chopper, and (5) shims. Hea
Similar Products:

• Bosch TS1007 Dado Insert
• Jet JW1044 4-Inch to 2-1/2-Inch Reducer
• Kreg R3 Pocket Hole Jig System
• Kreg SKO2 Pocket Hole Screw Kit
• BOSCH TS1010 Table Saw Pusher/Scale For 4000 Table Saws

List Price: $110.90 Offer Price: $89.00

Features:

• Saves 1/3 wood loss on each cut.
• Feeds easily when used for moderate rips and crosscuts on a table saw.
• Reduces “JUMP IN” for better “PULL-CONTROL.”
• Eliminates bottom splintering on RADIAL CROSSCUTS.
• With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines

Product Description
With this all purpose blade for table saws you can rip and crosscut 1″ 2″ rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1/16″ oversize to allow for resurfacing. Buy and sharpen one blade instead of 3 (24T rip, 50T combination and 80T crosscut).
Similar Products:

• Forrest STIF05 5-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor
• Forrest CM12806115 Chopmaster 12-Inch 80 Tooth ATB Miter Saw Blade with 1-Inch Arbor
• Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor
• Freud SD508 Super Dado 8-Inch Stack Dado
• Bessey KBK2440 Cabinet Door Parallel Jaw Bar Clamp Kit

List Price: $22.50 Offer Price: $21.00

Features:

• Saves 1/3 wood loss on each cut.
• Feeds easily when used for moderate rips and crosscuts on a table saw.
• Reduces “JUMP IN” for better “PULL-CONTROL.”
• Eliminates bottom splintering on RADIAL CROSSCUTS.
• With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines

Product Description
For smoother, quieter cuts, a single FORREST Dampener-Stiffener is highly recommended for all applications. Made from top-quality saw steel and precision ground to within 0.001″ of side runout. For best results, select one stiffener 1/2 to 2/3 the blade diameter and mount it against the outside of the blade.
Similar Products:

• Forrest WW10407100 Woodworker II 10-Inch 40 Tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor
• Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor
• Forrest CM12806115 Chopmaster 12-Inch 80 Tooth ATB Miter Saw Blade with 1-Inch Arbor
• Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor
• Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor

List Price: $64.40 Offer Price: $41.95

Features:

• An ideal saw blade for ripping or crosscutting through a variety of materials
• Ideal for underpowered saws that need full kerf stability
• Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut
• Non-stick Perma-Shield coating reduces gumming, rusting, and corrosion
• Limited lifetime warranty

Product Description
This heavy-duty combination blade is produced with extreme precision user lasers to cut the hardened blade bodies and tensioning machines ensure the blades stay true and flat under load.Great for underpowered saws that need full kerf stability.Laser-cut blade bodies, anti-vibration and expansion slots keep the blade running straight and true.Perma-SHIELD permanent non-stick coating prevents heat build-up, gumming and corrosion for long life. Application: Long Life In Stacked Chipboard And Manmade Materials
Amazon.com Product Description

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo — a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud Industrial Blades
Freud’s industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming — which prolongs the life of the blade.

About this Combination Saw Blade
The ultimate combination blade is now available in a thin kerf design with Freud’s LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features Laser-cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers.

Applications
This exceptional blade rips and crosscuts wood, chip board, plywood, and laminate — but it is not recommended for ferrous metals or masonry.

Warranty
This blade is covered by Freud’s limited lifetime warranty.
Similar Products:

• Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger
• Freud LU87R010 10-Inch 24 Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU96R010 10-Inch 80 Tooth TCG Thin Kerf Laminate Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

List Price: $51.44 Offer Price: $32.10

Features:

• Features Freud’s TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Thin kerf requires less power and allows for faster feed rate. Ideal for saws under 3 HP.
• Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
• Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up

Product Description
Use on all table, radial arm or underpowered saws for ripping soft and hardwood or plywood 3/4″ to 2-3/4″; for thinner or thicker materials with some loss of surface finish. Thin kerf for less material removal, more control, safer operation and minimized strain. Tri-metal brazing absorbs shock. Expansion slots help control expansion from heat of operation without added noise. Laser cut and computer pretensioned for long life, smooth operation. Tungsten carbide with titanium resists chemicals/acids naturally present in wood and wood products. TCS self-lubricating coating reduces friction for long life and precise cuts; resists chemicals, pitch, resin and rust; cleans with hot water. Alternate top bevel, resharpenable teeth.
Amazon.com Product Description

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo — a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud’s Industrial Blades
Freud’s Industrial Series of blades are designed for the serious woodworker. Available in a variety of styles for different applications, LU and LM blades feature thick carbide tips, precision tensioned bodies and other premium features found in every Freud blade. Industrial blades include red Perma-Shield coating or Silver ICE coating to help reduce friction, heat build-up and gumming, which add up to mean longer blade life.

About the 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade
This exceptional Freud blade requires less energy to feed the material into the saw blade, and eases the strain on your power tool. The “fusion” tooth design gives glass smooth side finishes as well as a chip-free top and bottom during both ripping and crosscutting applications; and the Perma-Shield permanent non-stick coating reduces friction, protecting this thin kerf saw blade against corrosion, gumming and pitch build-up. This laser blade made from high-strength steel is built for long life and precision, and it comes pre-tensioned to remain flat through the shocks from cutting and stresses from turning at high speeds. Its anti-vibration reed design eliminates all vibration and produces the cleanest cuts possible, making the use of a stabilizer unnecessary.

Applications
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-Shield coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4 to 2-3/4-inch thick wood, plywood, laminate, or chip board.

Key Technical Specs

• TiCo Hi-Density Carbide with Titanium
• Ideal for saws under 3 horsepower
• Tri-Metal Brazing for impact-resistant tips
• Non-stick Perma-Shield coating

Warranty
This blade is covered by Freud’s limited lifetime warranty.
Similar Products:

• Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger
• Freud LU83R010 10-Inch 50 Tooth ATB Thin Kerf Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU86R010 10-Inch 40 Tooth ATB Thin Kerf General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Bosch RDM9X2 25P 9-Inch 8+10T Demolition reciprocating Saw Blades – 25 Pack

List Price: $110.90 Offer Price: $89.99

Features:

• Saves 1/3 wood loss on each cut.
• Feeds easily when used for moderate rips and crosscuts on a table saw.
• Reduces “JUMP IN” for better “PULL-CONTROL.”
• Eliminates bottom splintering on RADIAL CROSSCUTS.
• With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines

Similar Products:

• Forrest STIF05 5-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor
• Forrest CM12806115 Chopmaster 12-Inch 80 Tooth ATB Miter Saw Blade with 1-Inch Arbor
• Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor
• Forrest MM10806 Miter Master 10″ 80 Tooth 5/8″ Arbor .105″ Kerf Wood Cutting Circular Saw Blade
• Forrest DK08244 Dado King 8″ 29/32″ Width 5/8″ Bore Dado Blade Set

List Price: $60.90 Offer Price: $29.99

Features:

• Premium 10-inch finish blade; 5/8-inch laser cut arbor; 72-tooth; ATB grind, thin kerf
• Large C2 micrograin carbide teeth allow for multiple resharpening and prolongs blade life
• Blade is precision balanced and tensioned to remain stabilized and balanced while in use
• Premium laser cut steel plate keeps blade flat and true for long lasting performance
• Laser cut sound dampening channels expand during heat build up, keeping the cut true and straight

Product Description
Thin kerf saw blades for ultra fine smooth cuts on all 5/8″ bore miter, radial armand table saws. Designed for ultra fine smooth finish in decorative moldings, veneer laminates, soft and hardwood cabinetry. Alternate top bevel, 5,500 maximum RPM, +15 degree hook angle, .071″ plate, .098″ kerf.
Similar Products:

• Hitachi C10FSH 10-Inch Sliding Compound Miter Saw with Laser
• Hitachi C10FSB 12 Amp 10-Inch Dual Bevel Sliding Compound Miter Saw
• Hitachi 310878 10-Inch 40 Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor
• Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor
• Hitachi 726101 12-Inch 90 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor

List Price: $137.88 Offer Price: $89.99

Features:

• Features Freud’s TiCo¿ Hi-Density Carbide with Titanium for long life and a flawless finish
• The negative hook angles make flat bottom grooves and virtually splinter-free cuts
• Slot widths from 1/4-inch to 13/16-inch in 1/16-inch increments
• Set includes two outer blades and five two wing chippers ( 4- 1/8″&1- 1/16″ )
• Includes shim set for micro adjustments

Product Description
8″ Professional, Stack Carbide Tipped Dado, With Steel Shims, 4 Carbide Tipped Chippers, Maximum 13/16″ Cut Width In 1/16″ Increments.
Amazon.com Product Description
The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo — a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud’s Dado Sets
Whether you’re a skilled professional or a weekend hobbyist, Freud has a dado for you. The SD608, Freud’s Dial-A-Width Dado, has a patented dial system for easy and precise adjustments while offering extremely accurate cuts. The SD300 Series adds a level of safety not found in other manufacturers’ dadoes, while the SD200 Series provides the quality of cuts you expect from Freud, at an attractive price.

About the 8-Inch Professional Dado Set
This kit gives you Freud’s quality and craftsmanship in a stacked dado set, but at a wobble dado price. The negative hook angles make flat bottom grooves and virtually splinter-free cuts, and this dado has two outside blades with five two wing chippers. This makes it ideal for underpowered saws because it requires less power to feed. All blades and chippers come with Freud’s anti-kickback design. This resharpenable set will produce grooves from 1/4 to 13/16-inch in 1/16-inch increments. This dado set comes with a shim set and carrying case as well as instructions on how to make basic dado sizes.

Applications
This set is ideal for creating flat-bottom grooves and virtually splinter-free cuts in hardwoods, softwoods, chip board, plywood, or laminate — but it’s not recommended for ferrous metals or masonry.

Warranty
This set is covered by Freud’s limited lifetime warranty.
Amazon.com Review
Freud’s 8-inch professional dado set delivers a very smooth flat-bottomed groove. This stack, when used on table and radial-arm saws, cuts slots, grooves, dadoes, and rabbets in hardwood, softwood, or plywood with the same high level of finish quality. The blades are resharpenable. They’ve also been laser-cut and sport carbide tips. In addition, this stack has a feature that limits the amount of bite a tooth can take, reducing the risk of kickback–for this reason, in fact, Freud suggests this set for underpowered saws. We tested this set on our 3-horsepower Powermatic model 66 (plenty of power) and found the results satisfying: smooth, with very minimal splintering. Shims are also included in this set to help you microadjust your width. This stack is a great tool for the home hobbyist who prefers not to spend a lot of money but still wants quality results. –Dori Anvinson
Similar Products:

• Bosch TS1007 Dado Insert
• Delta 34-264 8-Inch Dado Insert for Delta Contractors Saws and Right-Tilt Unisaws
• Bosch TS1002 Table Saw Rear Outfeed Support Extension
• Bosch TS1003 Table Saw Left Side Support Extension
• Bosch TS1004 Table Saw Dust Collector Bag

List Price: $86.68 Offer Price: $30.85

Features:

• An ideal saw blade for precise crosscuts in softwood, hardwood, fine moldings, and picture frame molding
• Thick MicroGrain carbide tips allow for more cuts between sharpening
• Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut
• Triple-chip grind tooth design for extremely smooth, glue line rips
• Limited lifetime warranty

Product Description
Use on table, radial arm or miter saws for rips and crosscuts; chipless cuts in chipboard, laminates, melamine or solid surface materials 1/2″ to 2-3/4″; for thinner or thicker materials with some loss of surface finish. Deep gullets for easy cutting. Tri-metal brazing absorbs shock. Expansion slots help control expansion from heat of operation without added noise. Laser cut and computer pretensioned for long life, smooth operation. Tungsten carbide with titanium resists chemicals/acids naturally presentin wood and wood products. Triple chip ground teeth.
Amazon.com Product Description

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo — a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud Industrial Blades
Freud’s industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming — which prolongs the life of the blade.

About this Crosscutting and Ripping Saw Blade
The Freud 10-inch 60-tooth industrial crosscut and rip saw blade is an ideal choice for use with all table saws, radial arm saws, and miter saws — in order to create precise crosscuts in softwood, hardwood, fine moldings, and picture frame molding. The Laser-cut anti-vibration slots drastically reduce vibration and sideways movement while extending blade life. With the ability to give consistent swirl-free finishes, the thick MicroGrain carbide tips allow for more cuts between sharpening.

Applications
Use this blade on table, radial arm or miter saws for rips and crosscuts. It creates chip-free cuts in chipboard, laminates, melamine or solid surface materials 1/2-inch to 2-3/4 inches.

Key Tech Specs:

• 5/8-inch arbor
• 1/2-inch minimum crosscutting
• 2-3/4-inch maximum crosscutting
• 3/8-inch minimum ripping
• 3/4-inch maximum ripping

Warranty
This blade is covered by Freud’s limited lifetime warranty.
Similar Products:

• Bosch 4000-07 15 Amp 10-Inch Worksite Table Saw with Folding Stand
• Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand
• Bosch 4100 10-Inch Worksite Table Saw
• Bosch 4100DG-09 10-Inch Worksite Table Saw with Gravity-Rise Stand and Digital Rip Fence
• Bosch DC010 Digital Carriage – 10 Inch Table Saw